UFI Software v1.2.0.399 Released
Table of Contents
Whats New :
- Introducing P2P(BitTorrent) support download
- Built with Aria2, to enable this function you have to allow the firewall to open when you're prompted to do so
- To prevent data corruptions, specially to users with limited internet connection, files bigger than 1GB should be downloaded using BitTorrent.
- Download tasks were cached, so you can resume later (Check "Autosave Unfinished Downloads" in Settings)
- Introducing new app module: UFI CHIP Prog
- Support SPI NOR Flash, SPI EEprom and I2C EEprom chip
- Support various type of chip with fast and easy user interface
- Support for Read, Write, Erase, Verify and Blank check as well as BP Unlock function for some SPI Flashes
- Usefull for BIOS recovery, Router flashing and so on
- Documentations and Adapter comming soon
- Introducing new UFIBOX firmware version 1.10
- UFI software version 1.2.0.399 requires UFIBOX with fw version 1.10
- Support Files Changes :
- Over 3.3TB compressed files uploaded to the support servers
- Added many popular brands to Android directory
- Added Schematics, QCN files and USB Drivers
- eMMC ToolBox Changes :
- ADD: Auto retry handling in case of un-successfull "Read" because of chips bad block
- ADD: Auto set partition config based on firmware selection on Factory Image write.
- ADD: SANDISK chip Smart and Health report
- BUGFIX: Special Task, Resize function was not handled correctly in some case.
- BUGFIX: FFU routine improved, in some rare case ffu might not be performed correctly.
- Android ToolBox Changes :
- ADD: Android SDK Path setting(adb.exe and fastboot.exe path)
- ADD: Confirmation dialog before auto extracting firmwares
- ADD: Special Task menu on the ADB Tab(removed Tool sub tab)
- Most function requires devices to be rooted
- This menus were dinamically changed based on the connected phone.
- Implemented tasks :
- Clean Viruses
- OEM-Unlock
- [Xiaomi] Disable Mi Cloud
- [Samsung] Exit Factory Mode
- ADD: Support for MT6750,MT6755(Helio P10),MT6757(Helio P20),MT6795(Helio X10),MT6797(Helio X20)
- Note that most of Helio SoC was fused during production time so - some partition might be protected for erase and write, in this case only full erase allowed.
- ADD: Special Task (MediaTek Tab) menus for:
- [Oppo] Clear Region Lock
- [Coolpad] Exit Factory Mode
- [ASUS] Disable Demo Live
- ADD: Enabled erase function for Qualcomm firehose mode(as many users request)
- ADD: Special Task (Qualcomm Tab) menus for:
- Full erase
- Full erase (including boot)
- [Coolpad] Exit Factory Mode
- [Oppo] Exit Fastboot Mode
- ADD: "Auto sparse" option on fastboot flashing
- Some "system.img" files greater than 2GB may cause fastboot crashes(depend on the fastboot version)
- If this option checked, files greater than 2GB will be "sparsed"
- BUGFIX: Fastboot detection after reboot bug introduced in version 1.2.0.390
- BUGFIX: Workaround for "delayed loading" when opening UFI Android ToolBox
UFI Box Features
UFI Box is a powerful EMMC Service Tool that can Read EMMC user data, as well as repair, resize, format, erase, read write and update the firmware on EMMC in Samsung, china phone SK Hynix, Toshiba, Kingston, micron, and other brands.
UFI Box is a tool to repair phones with the ability to :
- Repair EMMC
- Resize EMMC
- Format EMMC
- Write full data, erase fully
- Read boot1
- Read boot2
- Read EXT CSD
- Read User Data
- Update firmware
- Via test point
What are the advantages of UFI Box?
- Has its own software, a stand-alone
- Display that is easily understood by the user or newbie first technical advance that has been made as easy as possible usage Or ONE CLICK without having configurations app.
- Supported database of various kinds of IC EMMC, which in included in the software Ufi box
- Support Ic EMMC Samsung and china phone SK Hynix, Toshiba, Kingston, micron, and other brands
- Has a faster speed compared to other boxes because it uses an interface 8bit full speed
- Support the use, installation and use in support by practitioners directly
Hardware Features :
- USB 2.0 High-Speed(480 Mbps)
- Modern design, with built-in LDO Voltage Out and external power source
- Secured with Java smart card and online system
- Multiprotocol ready, with 20 (13 usable) multi-purpose IO pins and 1 Full-Speed USB-HOST
- Integrated software managed over-current protection
Software Features :
- Lowest-cost universal software platform in the market
- Work with standalone and user-friendly software
- Strong and secure software platform integrated with online(server based) security
- Planned to support as many as possible up-to-date repair solution
- Integrated file synchronising function
Compatibility
What are the supported OSes?
- UFI software developed inside Windows 7 64bit environment, but it can work with All other Windows version starting Windows XP.
- However, we recommend to use the software with Windows 7 or later.
- We have tested the software and drivers to be working with the following OSes :
- Windows XP Service Pack 3 (32bit)
- Windows 7 Home (32bit)
- Windows 7 Ultimate (32bit)
- Windows 7 Ultimate (64bit)
- Windows 8 Profesional (64bit)
- Windows 8.1 Profesional (64bit)
- Windows 10 Final (64bit)
Warranty
- All the hardware was passed the QC in the factory before dispatch, however, some devices may have problems in the customer's hand.
- UFi Box, UFI-Lite and the eMMC Socket were covered by 6-months limited warranty.
- This warranty does not include problems that were caused by the user himself, such as water damage, burns because of over-voltage, etc.
Package Contents.
- UFi Box USB2.0 High-Speed + Smartcard
- UFI-Lite USB3.0 SuperSpeed uSD/eMMC Reader
- 2 In 1 eMMC/eMCP socket (169-FBGA,153-FBGA,162-FBGA,186-FBGA)
- eMMC/eMCP socket (221-FBGA)
- UFI ISP Adapter V2
- USB Data Cable
- USB to DC 5V External Power cable
Download :
Source